Sunshine City

Everything You Wanted To Know About Air Compressors

  • Written by News Company


An air compressor can be described as a device that converts power into potential energy stored in compressed air. The air compressor is responsible for forcing more air into a storage tank, thereby increasing its pressure. According to the experts in the industry, air compressors are used to power a wide range of equipment, including paint sprayers, impact wrenches, and so on.

Different types of Air Compressors

Some compressors are designed using a rotating impeller to help generate air pressure. However, air compressors with a positive-displacement compressor are more popular these days and the air compressors work like a small combustion engine and it consists of a crankshaft, a cylinder, pistons, and a valve head. They also have an air tank to store a predetermined quality of air with a present pressure range. The energy of the pressurized air is ultimately used to drive air tools.

Typically, air compressors comprise one or two cylinders, depending on the tools they will have to power. Homeowners prefer to use a two-cylinder air compressor model that works like the single-cylinder model, except for the difference that there are two strokes during each revolution instead of just one.

Air compressors are fitted with a pressure switch to allow you to stop the motor when the pressure in the air tank reaches the preset limit. It is usually around 125 psi in most single-cylinder models. The compressors also come with a safety valve in case of a malfunction.

The piston compressors are well lubricated by the oil bath. The oil bath is responsible for making sure that the cylinder walls and the bearings are well lubricated during the crank rotations. The rings around the pistons are responsible for keeping the air compressed that is at the top of the piston so that the air does not come in contact with the lubricating oil. Unfortunately, sometimes a little oil might enter the compressed air. This is why air compressors require regular check-ups, especially in cases where the tools require oil-free air.

Another new air compressor model in the market comprises a one-piece piston or connecting rod. As there is no wrist pin, the piston has to move side to side while the shaft moves it up and down. The piston has a seal around it to prevent air leakage and maintain contact with the cylinder walls at the same time.

Here are a few tips to avoid any wastage of energy in the form of leakage or unused compressed air:

  1. Examine your usage levels.

  2. Look for leaks and eliminate them immediately.

  3. Reduce pressure drops.

  4. Verify the CFM output.

  5. Recover wasted heat.

  6. Use flow controllers.

  7. Change air filters regularly.


Air Compressors Then & Now

Until a few decades ago, most shops used a central power source to drive their tools using a system of belts, drive shafts and wheels. The power was routed all around the workspace using mechanical means. Over time, belts and shafts have disappeared, but a mechanical system is still in place to help power move around the shop. This system uses the energy stored in pressurized air by installing an air compressor. Experts from https://www.ablesales.com.au/air-compressors-factory-direct/ mention that the Air compressors are used in a wide range of situations ranging from gas stations to large manufacturing plants. In fact, air compressors have even found their way to home basements, garages, and workshops.

Picking Out A New Air Compressor

If you are looking for a new compressor for your business of home requirements, you have come to the right place. Here are a few key factors you need to remember while choosing an air compressor:

  • Size: Air compressors come in various sizes. You need to determine one that fits your requirements. Investing in a small one can be a waste of time if you run a large enterprise. You also cannot make the mistake of picking a large one and wasting precious resources.

  • Work environment: Understanding the work environment is key is deciding on an electric motor or a gasoline motor. While gasoline motors offer more portability, electric motors are less expensive and also require less maintenance.

  • Airflow: The airflow offered by an air compressor is measured in cubic feet per minute or CFM. According to the experts in the industry, the CFM output of an air compressor needs to be more than the operational CFM requirement and it also needs to be less than the maximum CFM output at the same time.

  • Size of the compressor tank: A small tank is sufficient for short, concentrated bursts of power. If you require sustained power over longer periods, you will need to invest in an air compressor that comes with a larger tank.

  • Control systems: If you do not require continuous air, a start and stop system will work perfectly fine. However, if you require speed control, you will need to use a dual control system that comes with an auxiliary valve.

  • Horsepower: The horsepower will help you determine whether the air compressor can produce enough air for your requirements.

  • External Features: An air compressor requires protection from water and extreme temperature to continue working. Experts advise choosing a compressor that comes with cast-iron construction so that it has added durability and reliability.

  • Price: Rather than investing in inexpensive air compressors and replacing them regularly, look for a unit that will last through its expected service life. Even beginners can learn how to use an air compressor in no time at all. The first thing you need to do is to check the pump oil level. If it is empty, you need to fill it till the indicated level. Then you will need to connect the hose to the regulator valve, followed by connecting your power tool to the hose. Once you are sure the attachments are in place, you need to plug in the compressor and start using it. It is a good idea to avoid using extension cords as they might cause the air compressor to start heating up.

At the end of the day, an air compressor is a useful device to have at your home, workspace as well as at large manufacturing spaces.

Real Estate Agents vs. Realtors: What's the Difference?

You're looking to buy a home and you've decided that it's time to hire professional help. Whether you're a first-timer or a repeat buyer, the decision whether to go with a real estate agent or a realtor can be pretty confusing. Let's take a closer look at the difference between agents and those ...

7 Ways Technology Is Changing Pool Maintenance

As time goes on, technology advances as well. New inventions are created every single day to cope with the needs of the people. This is especially true in pool maintenance which is very beneficial to pool owners all around the world. In this article, we’ll list down the ways technology is chan...

How To Choose The Right Robotic Pool Cleaner

Several inventions today make swimming pool cleaning and maintenance a breeze. One of them is a robotic swimming pool cleaner. This may be a costly investment, but it pays off in due course. Well, that’s because it gets the job done quickly and efficiently. If you are planning to buy one, you ...

Experience A Seachange with your New Business in Australia

Business owners often dream of what it would be like to have a change in life. At Bsale, the team are receiving thousands of enquiries from buyers looking to relocate, especially in the wake of COVID lockdown restrictions. Perhaps they are tired of the big city and want to move to a coastal tow...

SunEnergy breaks into WA solar market

SunEnergy has expanded their company services into the Western Australian market following strong growth during 2020/21 and predicted future growth for the solar industry in Australia.  Director of Operations for SunEnergy Mrs Chantha Lake said, “the solar industry is forecast for continued ...

Sunny skies leaving Aussies in the dark

Abundant sunshine and high energy prices have made solar a popular choice in Australia. As of 31 Oct 2020, more than 2.5 million rooftop solar power systems had been installed across the country1. However, according to the Clean Energy Regulator (CER), around one in five (18%) solar systems ar...

Why You Should Be Using Solar Energy

We’ve known for a while now that renewable sources of energy are the future. We’ve been learning about them in schools, and listening to interviews with experts on how and why they’re better than the fuels we’re using now. But most of these often have complicated terms, which is why we...

Appeals process needed in Solar Retailer Code

The ACCC is proposing to require inclusion of an appeals process in granting re-authorisation to the Clean Energy Council’s Solar Retailer Code of Conduct. The Solar Code sets minimum standards for retailers selling solar photovoltaic (solar PV) systems to consumers. To be an approved...

Battery World franchisees empower community during pandemic

Australia’s leading battery retailer, Battery World, has powered through the COVID-19 pandemic, with franchisees recognising their pivotal role in delivering essential products and services to communities, keeping them recharged and safe on the road, in the office and at home.  Battery W...